A fundamental component of RADIUS is a client's validation of the RADIUS server's identity.
This is accomplished by hosting a certificate on the RADIUS server that has been validated by a trusted Certificate Authority (CA).
To download the certificate: After you've installed the certificate, you can use it as the CA certificate option when setting up an IU Secure connection.
This document will guide you through the process of connecting to the secure wireless network in Windows 7. If you need help setting up your wireless connection you may contact the ITS Helpdesk. Once the wireless tab has opened, select the link marked “Open Network and Sharing Center”. Once the “Network and Sharing Center” windows opens, select the link marked “Set up a new connection or network”. As the “Set Up a New Connection or Network” window pops up select the option marked “Manually connect to a wireless network” and select next. Connection should complete successfully and the wireless icon at the bottom right-hand corner of the screen should show connection status.* Additional installation of Cisco Clean Access and a Anti-Virus Program of your choice will be required before connection can fully complete.- Information on Installing Cisco Clean Access can be found here.
You should be able to connect automatically to the Northwestern Wireless Network with your Net ID and Net ID password through your Network Preferences.
The generic settings below will allow you to configure a wireless device to connect to eduroam.
This can occur if the if the RADIUS certificate, or any certificate in the chain, is configured or CRL or OCSP. Although you may be able to connect to the eduroam wireless network without validating the server certificate, your connection will not be secure.You must ensure server certificate validation is enabled.IU Secure authentication servers use USERTrust as their root certificate authority.You'll need a valid USERTrust primary root certificate in Privacy-Enhanced Mail (PEM) format to validate the IU Secure connection.